Liquid Force
2005 Spectrum Kites
Sizes (measured in flat area): 6.0, 8.0, 10.0, 12.0, 14.0, 17.0 and 20.0
Liquid Force Spectrum II Kites
Performance – Quick and nimble, yet steady and stable. These
kites perform well enough for the best pros in the world, yet are stable and
predictable enough for beginning kiters.
Safety – Leashless Spinning Powerlock™ safety system. Carbon
Powerlock bar eliminates need for an additional fixed loop, which means that the
kite can be depowered by pulling a single release handle whether the kite is
completely depowered or locked in for full power. Sliding depower leash on rear
line will not tangle even after multiple spins.
Strength – Taped and triple stitched seams. Double reinforced
Dacron panels on leading edge. 2 ply trailing edge, Kevlar scuff pads and strut
ends.
Convenience – Save yourself time and energy using the simple
inflation system allowing you to pump the struts up to full pressure at the
center of the kite with only one valve to seal before inflating the leading
edge.
New For 2005
For 2005 Liquid Force have maintained the outstanding performance
characteristics of the Spectrum 1 and built into it all the improvements and
upgrades suggested by its team of international riders.
SPIDER INFLATION SYSTEM : Gone are all the
ball valves and individual strut inflation. One pump does all five internal
struts, then the second pump does the leading edge and wingtips. The system is
fully independent and removable.
FULLY SPINNING BAR, safety leash and release system, with powerlock bar
and ratchet depower strap.
5th line attachment point built into the leading edge.
Leading edge and wingtip struts joined into one.
New edgier graphics design.
New sail cut and increased panels for a
tighter, more rock solid canopy.
Increased diameter wingtip struts for increased stiffness.
Beefed up seams and triple stitched construction.
New sizing range. Kites available as kite only or complete with bar & lines.
New improved bag design and shape.
A Medium/High aspect kite with “power to burn”, unbelievable lift and incredible
hang time. A fast flying, fast turning kite...
LIQUID FORCE KITEBOARDS
Shape – The most important thing. Really, the only thing that matters in a board. Our boards are all shaped by the best shapers in the world. Our shapers utilize 20+ years of shaping experience combining years of shaping for many different board sports to bring you the best kiteboards in the world.
PBT Top and Bottom Sheets – Indestructible, lightweight and shiny. Snowboards and wakeboards have been using it for years… we’ve perfected it. Lightweight, flexible and strong. All Liquid Force boards have it on the deck and the base.
Stainless Steel Inserts - All boards have stainless steel footstrap and handle inserts. These inserts will hold up to the harshest environments and greatest amounts of force. You will not experience pulled out inserts or screws poking through the bottom of your Liquid Force board.
Resin Molded Fins
– Computer foiled fins designed to have the greatest hold and least amount of
drag and a perfectly molded fin every time. Resin molded for the highest
strength available. Four fins with every board.
Sublimated Graphics – All Liquid Force boards have the graphics
sublimated into the PBT top and bottom sheets. The best looking graphics in the
world will not rub off or fade away in the sun.
ELEMENT
128cm x 41cm (2.1kg) and 134cm x 42cm (2.3kg)
The Element boards utilize Liquid Force's exclusive Supercore. The Divinycell
foam that Liquid Force uses has the highest strength to weight ratio of any
other foam, and won't take on water like some cheaper foams or balsa cores.
Our foam has been tested for years to ensure that it maintains its
responsiveness and strength for the life of your board. Unique single to double
concave bottom with channels exiting out of the scalloped tail. Moehau
Goold's board of choice, these boards are great all-around boards
performing well in waves, sliders, flat water, or chop.
MLF
120cm x 39.5cm (2.2kg)
Take your riding to the next level
with this little pocket rocket from Liquid Force.
The
MLF 120 is in a class by itself as our
mini board. Perfect for the advanced rider and even lighter weight riders who
don't need as much board to get going, the MLF 120 is sure to please. Advanced
riders looking to go smaller on their ride and still have a board that holds an
edge better than any other mini board due to its
double concave hull with channels hugging the
rails will love the MLF. Channels in the tip and tail along with
1.4 inch fiberglass fins top off the
hold this board gives the rider allowing for bigger kites and bigger air!!
New lighter
weight in 2005, with bold AC-DC graphics.
Invincible PBT Base with sublimated graphics, stainless steel inserts, epoxy
glass fins, lightweight aerocore.
Drop Series
130cm x 39cm (2.3kg) and 136 x 39.5cm (2.5kg)
Surf designed shape, dominatrix
single concave bottom and fully rounded edges.
A great smooth riding Rolls Royce ride in all conditions but get it in the waves
and this is where it will really shine.
The Drops will allow you to throw buckets of spray and gouge deep into waves all
day long due to its single concave hull and softened rails.
The single concave hull allows the board to track like its on rails when ridden
down the line while the softened rails will allow cutbacks and bottom turns like
you always dreamed about!
Jason Slezak's board of choice,
these boards are great all-around boards performing well in waves, flat water,
and chop.
NEW lighter weight in 2005.
Invincible PBT Base with sublimated graphics, stainless steel inserts, epoxy
glass fins, lightweight aerocore.
Drop LTD.
132cm x 40cm (2.1kg) and 138cm x 41cm (2.3kg)
For all those out there that said
Liquid Force boards were heavy – eat your words!
The Drop Ltds are a limited edition lightweight and flexible version of the
regular Drop design, manufactured with divinycell cores, ABS side walls and
glossy PBT tops and bottoms.
They utilize the same rounded rails and dominatrix style single concave bottom
as the regular Drops but in 132 and 138 sizes.
Invincible PBT Base with sublimated graphics, stainless steel inserts, epoxy
glass fins, super lightweight divinycell cores, ABS sidewalls.
These boards are great all-around boards performing well in waves, flat water, and chop.
WLF Series
130cm x 46cm (2.2kg) and 140cm x 46cm (2.5kg)
The WLF (Wide Liquid Force) boards also utilize Liquid Force's exclusive Hybrid
Sidewall construction. These boards are great all-around performers, but excel
in light winds and are perfect boards for the heaviest of riders or riders
looking to rig a smaller kite and still have the ability to easily get up on
plane.
Initially built as the super
lightweight weapon these boards are turning heads.
Short and very wide these rocket upwind like no other and despite their size
will hold a hard edge even after the wind picks up due to their off centerline
mounted binding position. You are guaranteed to have fun on this one!!
Truth Series
150 x 39.5 (2.9kg) and 160 x 42cm (3.0kg)
The
flat bottom hull of the Truth series
allows for minimal drag along the hull
allowing for easier starts and continued speed during lulls so you spend more
time on top of the water and less time in it. The side cut profile and
1.4 inch fiberglass fins of the Truth
give the board unmatched handling characteristics in choppy conditions and waves
as the board is quick to roll on edge,
allowing for a smooth ride in otherwise bumpy conditions.
The traditional shallow rocker and rail outline,
combined with the full tip and tail design and the flat bottom hull, allows for
easy starts with minimal drag and continued speed through those lulls.
You cannot get a better beginner to intermediate
board and no-one can match the incredible value and price of this 2005 model.
Invincible PBT Base with sublimated graphics, stainless steel inserts, epoxy
glass fins, lightweight aerocore.
Aura Series
130cm x 39cm (2.3kg)
Nina Heidberg
signature model - a woman specific board.
The Aura 130 utilizes the Drop 130 mold with a softer flex and slightly narrower
stance.
Invincible PBT Base with sublimated ladies style graphics, stainless steel
inserts, epoxy glass fins, lightweight aerocore.
Truth (2004)
Only one left
150cm x 39.5cm
Actual board graphics are yellow with blue
Liquid Force Strap Suction Kit
A complete board interface system that will change the way we
attach our boards to our feet forever. The comfort, flexibility and ease of
entry of conventional footstraps, with the lock-down and board control
associated with bindings.
LF Air Footpads – Ergonomically designed footpads are canted
inward to properly align knees and hips while riding. Proper alignment allows
for less muscle fatigue and safer landings. Airpack under heel dampens
vibrations and cushions the ride, further saving your knees on landings. Soft
molded EVA foam forms to your feet providing a snug, comfortable fit never
before available in footpads.
LF Wide Footstraps – Fixed Pro straps comfortable and
functional. Softer materials cushion the foot for a more comfortable ride, and
allow the foot to seat in for a greater hold.
LF Heelstraps – An optional addition that comes with every
Strap Suction kit. The way that heelstraps always should have been. Injection
molded with Craeton rubber, will not crack or fade or lose their stretch over
time. Molded shape keeps them in place to easily slide them on your foot and to
stay there for your entire ride. Super stretch allows them to easily come off
when you want them to.
All Liquid Force boards from Boost come with these footstraps - we think they ROCK!
Adjustable straps can be ordered.