KILL ZONE ~ Near Future Skirmish Gaming~

To be honest, this was a project designed to fill the table with less work than making a building.

The base is beaverboard, and the poles nails pushed through countersunk holes in the bottom and epoxied into place. The fencing is 1/4" aluminium mesh mesh tied into place with wire. I later found better fence mesh at a Michael's Craft Store, and used it as a fence for 'The Rave'.

I put bits of litter & foam vegetation in the lot and added a cut/torn entry at the rear.

It cam be used as a parking lot, or as a small shanty town with a few squatter's huts. The fence provides no cover at all, but hinders movement.