-
10" X 30" continuous, sulphate resistant concrete
footings, with steel footing dowels
-
Engineer designed steel reinforced 9" X 8' concrete
walls
-
9" X 24" 25 mpa steel reinforced grade beam
-
Basement walls - 25 mpa (3500
psi) concrete
-
Garage
Floors - 25 mpa (3500 psi) concrete
-
Basement Floors - 25 mpa (3500
psi) concrete
-
*Truss Joist MacMillan engineered TJI floor joist system
@ 16" O.C.
-
Main Beam - Engineered steel
I-Beam
-
5/8" tongue & groove fir plywood subfloor screwed
and glued to joists
-
*Kiln dried 2" X 6" studs @ 16" O.C. on
exterior walls
-
Kiln dried 2" X 4" studs @ 16" O.C. on interior
walls
-
Kiln dried 2" X 4" studs @ 16" O.C. on
walls in garage
-
Exterior wall sheathing 3/8" plywood
-
*3/8" spruce plywood roof sheathing with
H-clips
-
Roof construction - professionally stick framed at 16"
O.C. and/or engineered trusses at 24' O.C.
-
*Basement walls studded floor to ceiling with expansion
joint at 16" O.C.
-
Radon barrier under basement floor
slab
-
6" of 3/4" down gravel driveway to 60' long
and 20' wide
-
Furnace ducts
power-vacuumed
-
Home professionally cleaned at end of
construction
-
Lot surveyed prior to
digging
-
Building Location Certificate and Zoning Memorandum
provided
-
Registered with Manitoba New Home Warranty Program
